Telescopic Chute

At the start of dust discharge the Telescopic chute is lowered close to the level where dust will stock pile. As the  heap builds-up the chute is  incrementally raised to  ensure that  the height of fall of the  dust is  minimum which  results minimum dust  generation. As  annular suction hood provided around the bottom most pipe and connected through a flexible pipe to  the  nearest  Bag filter suction  point ensures  that   whatever small  quantity  of  dust  is generated at the discharge point is sucked-in  and doesn't escape to  the atmosphere. The control system for raising the  chute incrementally can be manual push button operated or can be electronic sensor operated which senses the heap surface as it comes close to the chute. The main advantage of the Telescopic chute offered by EEPL is that it doesn't require any platform  at  the  hopper  level  as is a must with other  types  of  Telescopic chutes. It  also doesn't require a long and clumsy rope, pulley, & rope drum arrangement to be installed on the Platform.

MANUFACTURING RANGE

• Type: Self supporting from hopper flange

• Size: Upto 750 SQ hopper Outlet

• Lift: Upto 10 m

• M.O.C of pipe: IS 2062 / SAILHARD / SS

• Power: 0.25 - 2.2 KW

• Lifting speed: 25-50 mm / sec

• Operation method: Push button Inching,  Sensor operated